计算流体动力学导论：有限体积法（第2版）（英文版） [An Introduction To Computational Fluid Dynamics:The Finite Volume Method epub pdf mobi txt 电子书 下载 2024

计算流体动力学导论：有限体积法（第2版）（英文版） [An Introduction To Computational Fluid Dynamics:The Finite Volume Method epub pdf mobi txt 电子书 下载 2024

☆☆☆☆☆
简体网页||繁体网页



点击这里下载

计算流体动力学导论：有限体积法（第2版）（英文版） [An Introduction To Computational Fluid Dynamics:The Finite Volume Method epub pdf mobi txt 电子书 下载 2024

类似图书 点击查看全场最低价

---

内容简介

　　We were pleasantly surprised by the ready acceptance of the first edition of our book by the CFD community and by the amount of positive feedback received over a period of 10 years. To us this has provided justification of our original plan， which was to provide an accessible introduction to this fast-growing topic to support teaching at senior undergraduate level， post- graduate research and new industrial users of commercial CFD codes. Our second edition seeks to enhance and update. The structure and didactic approach of the first edition have been retained without change， but aug- mented by a selection of the most important developments in CFD.

内页插图

目录

Preface
Acknowledgements
1 Introduction
1.1 What is CFD?
1.2 How does a CFD code work?
1.3 Problem solving with CFD
1.4 Scope of this book

2 Conservation laws of fluid motion and boundary conditions
2.1 Governing equations of fluid flow and heat transfer
2.2 Equations of state
2.3 Navier-Stokes equations for a Newtonian fluid
2.4 Conservative form of the governing equations of fluid flow
2.5 Differential and integral forms of the general transport equations
2.6 Classification of physical behaviours
2.7 The role of characteristics in hyperbolic equations
2.8 Classification method for simple PDEs
2.9 Classification of fluid flow equations
2.10 Auxiliary conditions for viscous fluid flow equations
2.11 Problems in transonic and supersonic compressible flows
2.12 Summary

3 Turbulence and its modelling
3.1 What is turbulence?
3.2 Transition from laminar to turbulent }low
3.3 Descriptors of turbulent flow
3.4 Characteristics of simple turbulent flows
3.5 The effect of turbulent fluctuations on properties of the mean flow
3.6 Turbulent flow calculations
3.7 Reynolds-averaged Navier-Stokes equations and classical turbulence models
3.8 Large eddy simulation
3.9 Direct numerical simulation
3.10 Summary

4 The finite volume method for diffusion problems
4.1 Introduction
4.2 Finite volume method for one-dimensional steady state diffusion
4.3 Worked examples： one-dimensional steady state diffusion
4.4 Finite volume method for two-dimensional diffusion problems
4.5 Finite volume method for three-dimensional diffusion problems
4.6 Summary

5 The finite volume method for convection-diffusion problems
5.1 Introduction
5.2 Steady one-dimensional convection and diffusion
5.3 The central differencing scheme
5.4 Properties of discretisation schemes
5.5 Assessment of the central differencing scheme for convectiondiffusion problems
5.6 The upwind differencing scheme
5.7 The hybrid differencing scheme
5.8 The power-law scheme
5.9 Higher-order differencing schemes for convection-diffusion problems
5.10 TVD schemes
5.11 Summary

6 Solution algorithms for pressure-velocity
6.1 Introduction
6.2 The staggered grid
6.3 The momentum equations
6.4 The SIMPLE algorithm
6.5 Assembly ora complete method
6.6 The SIMPLER algorithm
6.7 The SIMPLEC algorithm
6.8 The PISO algorithm
6.9 General comments on SIMPLE， SIMPLER， SIMPLEC and PISO
6.10 Worked examples of the SIMPLE algorithm
6.11 Summary

7 Solution of discretised equations
7.1 Introduction
7.2 The TDMA
7.3 Application of the TDMA to two-dimensional problems
7.4 Application of the TDMA to three-dimensional problems
7.5 Examples
7.6 Point4terative methods
7.7 Multigrid techniques
7.8 Summary

8 the finite volume method for unsteady flows
8.1 Introduction
8.2 One-dimensional unsteady heat conduction
8.3 Illustrative examples
8.4 Implicit method for two- and three-dimensional problems
8.5 Discretisation of transient convection-diffusion equation
8.6 Worked example of transient convection-diffusion using QUICK differencing
8.7 Solution procedures for unsteady flow calculations
8.8 Steady state calculations using the pseudo-transient approach
8.9 A brief note on other transient schemes
8.10 Summary

9 Implementation of boomfary confftions
9.1 Introduction
9.2 Inlet boundary conditions
9.3 Outlet boundary conditions
9.4 Wall boundary conditions
9.5 The constant pressure boundary condition
9.6 Symmetry boundary condition
9.7 Periodic or cyclic boundary condition
9.8 Potential pitfalls and final remarks

10 Errors and uncertainty in CFD modelling
10.1 Errors and uncertainty in CFD
10.2 Numerical errors
10.3 Input uncertainty
10.4 Physical model uncertainty
10.5 Verification and validation
10，6 Guidelines for best practice in CFD
10.7 Reporting/documentation of CFD simulation inputs and results
10.8 Summary

11 Methods for dealing with complex geometries
11.1 Introduction
11.2 Body-fitted co.ordinate grids for complex geometries
11.3 Catesian vs. curvilinear grids - an example
11.4 Curvilinear grids - difficulties
11.5 Block-structured grids
11.6 Unstructured grids
11.7 Discretisation in unstructured grids
11.8 Discretisafion of the diffusion term
11.9 Discretisafion of the convective term
11.10 Treatment of source terms
11.11 Assembly of discretised equations
11.12 Example calculations with unstructured grids
11.13 Pressure-velocity coupling in unstructured meshes
11.14 Staggered vs. co-located grid arrangements
11.15 Extension of the face velocity interpolation method to unstructured meshes
11.16 Summary

12 CFD modelling of combustion
12.1 Introduction
12.2 Application of the first law of thermodynamics to a combustion system
12.3 Enthalpy of formation
12.4 Some important relationships and properties of gaseous mixtures
12.5 Stoichiometry
12.6 Equivalence ratio
12.7 Adiabatic flame temperature
12.8 Equilibrium and dissociation
12.9 Mechanisms of combustion and chemical kinetics
12.10 Overall reactions and intermediate reactions
12.11 Reaction rate
12.12 Detailed mechanisms
12.13 Reduced mechanisms
12.14 Governing equations for combusting flows
12.15 The simple chemical reacting system (SCRS)
12.16 Modelling of a laminar diffusion flame - an example
12.17 CFD calculation of turbulent non-premixed combustion
12.18 SCRS model for turbulent combustion
12.19 Probability density function approach
12.20 Beta pdf
12.21 The chemical equilibrium model
12.22 Eddy break-up model of combustion
12.23 Eddy dissipation concept
12.24 Laminar flamelet model
12.25 Generation oflaminar， flamelet libraries
12.26 Statistics of the non-equilibrium parameter
12.27 Pollutant formation in combustion
12.28 Modelling of thermal NO formation in combustion
12.29 Flamelet-based NO modelling
12.30 An example to illustrate laminar flamelet modelling and NO modelling of a turbulent flame
12.31 Other models for non-premixed combustion
12.32 Modelling ofpremixed combustion
12.33 Summary

13 Numedcal calculation of radiative heat transfer
13.1 Introduction
13.2 Governing equations of radiative heat transfer
13.3 Solution methods
13.4 Four popular radiation calculation techniques suitable for CFD
13.5 Illustrative examples
13.6 Calculation of radiative properties in gaseous mixtures
13.7 Summary

Appendix A Accuracy of a flow simulation
Appendix B Non-uniform grids
Appendix C Calculation of source terms
Appendix D Limiter functions used in Chapter 5
Appendix E Derivation of one-dimensional governing equations for steady， incompressible flow through a planar nozzle
Appendix F Alternative derivation for the term (n . grad Ai) in Chapter 11
Appendix G Some examples
Bibliography
Index

精彩书摘

　　The discussion of the k-e turbulence model, to which we return later, the material in Chapters 2 and 3 is largely self-contained. This allows the use of this book by those wishing tO concentrate principally on the numerical algorithms, but requiring an overview of the fluid dynamics and the math- ematics behind it for occasional reference in the same text.
　　The second part of the book is devoted to the numerical algorithms of the finite volume method and covers Chapters 4 to 9. Discretisation schemes and solution procedures for steady flows are discussed in Chapters 4 to 7. Chapter 4 describes the basic approach and derives the central difference scheme for diffusion phenomena. In Chapter 5 we emphasise the key prop- erties of discretisation schemes, conservativeness, boundedness and trans- portiveness, which are used as a basis for the further development of the upwind, hybrid, QUICK and TVD scheme

计算流体动力学导论：有限体积法（第2版）（英文版） [An Introduction To Computational Fluid Dynamics:The Finite Volume Method epub pdf mobi txt 电子书 下载 2024

计算流体动力学导论：有限体积法（第2版）（英文版） [An Introduction To Computational Fluid Dynamics:The Finite Volume Method 下载 epub mobi pdf txt 电子书 2024

评分☆☆☆☆☆

还没时间看，经典教材，习惯好评

评分☆☆☆☆☆

学CFD必看的书啊！

评分☆☆☆☆☆

这本书写的简单明了，而且给了大量的例子，让人一看就明白。比一些经典的教材更适合自学。非常喜欢！

评分☆☆☆☆☆

在书店看上了这本书一直想买可惜太贵又不打折，回家决定上京东看看，果然有折扣。毫不犹豫的买下了，京东速度果然非常快的，从配货到送货也很具体，快递非常好，很快收到书了。书的包装非常好，没有拆开过，非常新，可以说无论自己阅读家人阅读，收藏还是送人都特别有面子的说，特别精美；各种十分美好虽然看着书本看着相对简单，但也不遑多让，塑封都很完整封面和封底的设计、绘图都十分好画让我觉得十分细腻具有收藏价值。书的封套非常精致推荐大家购买。 打开书本，书装帧精美，纸张很干净，文字排版看起来非常舒服非常的惊喜，让人看得欲罢不能，每每捧起这本书的时候 似乎能够感觉到作者毫无保留的把作品呈现在我面前。 作业深入浅出的写作手法能让本人犹如身临其境一般，好似一杯美式咖啡，看似快餐，其实值得回味 无论男女老少，第一印象最重要。”从你留给别人的第一印象中，就可以让别人看出你是什么样的人。所以多读书可以让人感觉你知书答礼，颇有风度。 多读书，可以让你多增加一些课外知识。培根先生说过：“知识就是力量。”不错，多读书，增长了课外知识，可以让你感到浑身充满了一股力量。这种力量可以激励着你不断地前进，不断地成长。从书中，你往往可以发现自己身上的不足之处，使你不断地改正错误，摆正自己前进的方向。所以，书也是我们的良师益友。 多读书，可以让你变聪明，变得有智慧去战胜对手。书让你变得更聪明，你就可以勇敢地面对困难。让你用自己的方法来解决这个问题。这样，你又向你自己的人生道路上迈出了一步。 多读书，也能使你的心情便得快乐。读书也是一种休闲，一种娱乐的方式。读书可以调节身体的血管流动，使你身心健康。所以在书的海洋里遨游也是一种无限快乐的事情。用读书来为自己放松心情也是一种十分明智的。 读书能陶冶人的情操，给人知识和智慧。所以，我们应该多读书，为我们以后的人生道路打下好的、扎实的基础！读书养性，读书可以陶冶自己的性情，使自己温文尔雅，具有书卷气；读书破万卷，下笔如有神，多读书可以提高写作能力，写文章就才思敏捷；旧书不厌百回读，熟读深思子自知，读书可以提高理解能力，只要熟读深思，你就可以知道其中的道理了；读书可以使自己的知识得到积累，君子学以聚之。总之，爱好读书是好事。让我们都来读书吧。 其实读书有很多好处,就等有心人去慢慢发现. 最大的好处是可以让你有属于自己的本领靠自己生存。 最后在好评一下京东客服服务态度好，送货相当快,包装仔细！这个也值得赞美下！希望京东这样保持下去！

评分☆☆☆☆☆

学院集体采购的，还没看

评分☆☆☆☆☆

内容不错。

评分☆☆☆☆☆

非常经典的教材，比中文的清晰，更容易让人理解。

评分☆☆☆☆☆

纸张质量不是很好，感觉印刷得有些粗糙

评分☆☆☆☆☆

一如既往！！！！！！！

类似图书 点击查看全场最低价